Dometic SMEV MO9222 Hob Fixing Kit

Dometic SMEV MO9222 Hob Fixing Kit

The Dometic/Smev MO9222 Hob Fixing Kit is a genuine mounting hardware set designed to securely install Dometic or Smev cooker hobs in caravans, motorhomes, campervans and boats. Whether you’re installing a new hob or replacing worn fixings, this kit includes all the essential brackets, screws and clamps needed to fasten the hob safely to the worktop or furniture panel, ensuring it stays stable and vibration-free even when on the move.

Proper hob fixation is critical for both safety and performance: a poorly secured hob can shift during travel, causing gas hose strain, misalignment and potential leaks. With this factory-approved fixing kit, you get peace of mind that your cooker hob stays rigidly mounted, performs reliably and meets the demands of touring life.

Kit Contents

This MO9222 fixing kit typically contains:

• Metal fixing brackets (left and right) – provide secure clamp points under the worktop

• Mini angle brackets – support the hob body where needed

• Assorted screws and bolts – correct lengths and thread types for Dometic/Smev models

• Hob support clips – extra stability around perimeter (where applicable)

Weight

• Approximate Weight: 0.30 kg (300 g)

How and Where It Is Used

The Dometic/Smev MO9222 Hob Fixing Kit is used when fitting a Dometic or Smev cooker hob into a vehicle’s kitchen worktop. This includes both new installations during conversions or builds and replacement of fixing hardware when original brackets have corroded, bent or failed over time.

Typical installation location:

• Caravan and motorhome kitchens

• Campervan cooker areas

• Boats with compact cooking bays

The fixing kit ensures that the hob sits flat and secure within the cut-out, with no movement under the stress of travel or use. Once fixed correctly, the cooker hob remains stable when opening/closing lids, lighting flames or placing cookware on the burners.

Uses

• Mounting new Dometic/Smev hobs securely in worktops

• Replacing worn or missing fixings on existing cooker installations

• Preventing movement during travel and reducing stress on gas fittings

• Improving safety by ensuring proper hob alignment

• Maintenance and refurbishment of touring kitchens

Fitting Instructions

Tools Needed: Screwdriver set (Philips + flat), adjustable spanner, drill with small bits (if new holes are needed), spirit level, pencil.

Important Safety Note: Turn off gas and electrical supplies before starting work on any cooker installation.

1. Prepare Hob Cut-Out:

   • Ensure the hob cut-out in the worktop is correct size and square.

   • Clean edges so brackets sit flush.

2. Position Hob in Cut-Out:

   • Lower the hob gently into the cut-out. The hob flange should sit flat on the worktop.

3. Fit Fixing Brackets:

   • From underneath the worktop, locate the supplied main fixing brackets at the designated points on the hob base.

   • Align brackets so they grip the underside lip of the hob and the underside of the worktop.

4. Secure with Screws:

   • Using the provided screws, tighten the fixing brackets to the hob base.

   • Tighten evenly on both sides so the hob pulls down uniformly without rocking.

5. Add Support Clips (if supplied):

   • Some kits include additional support clips for corners or edges — install these next according to the instruction leaflet.

   • Ensure clips are snug but don’t over-tighten (which can distort the worktop).

6. Check Level:

   • With all fixings in place, use a spirit level to confirm the hob surface is level. Adjust bracket tightness slightly if needed.

7. Test Stability:

   • Press lightly on different parts of the hob to ensure it does not move or flex. A well-fitted hob should remain firm.

8. Reconnect Services:

   • Once fixed securely, reconnect the gas supply and electrical connections (if applicable). Always check for gas tightness and correct operation before use.

Why Choose This Fixing Kit?

The Dometic/Smev MO9222 Hob Fixing Kit gives you a complete, reliable solution for cooker hob installation in mobile homes where movement and vibration are daily realities. By using genuine fixing hardware designed for your Dometic/Smev appliance, you help ensure:

• Stability and reduced vibration noise

• Minimal stress on gas hoses and regulators

• Professional-looking installation

• Improved safety and performance