Menabo Leopard Black Duo Rail Roof Bars (75g Max.) - 000-123700000

Maximum load capacity of 75kg

Practical and quick fixing system for easy installation and removal

Aerodynamic design

Anti-whistle rubber profile

Aluminium construction

T-System slot in the aluminium profile

Antitheft lock, adding an extra layer of security

These roof bars are designed to mount across your vehicle’s roof on existing roof rails — specifically vehicles with raised or flush/integrated longitudinal roof rails (rails that run front-to-back along the roof). They do not fit vehicles without roof rails.

• Fits: Raised or flush/integrated roof rails

• Not suitable for: Smooth roofs with no rails

🔧 How It Is Fitted — Install Instructions 

Before You Start

1. Check compatibility: Confirm your vehicle has suitable roof rails and check the roof’s maximum load capacity (bars + cargo must stay within rating).

2. Max load: 75 kg (bars + cargo), subject to your vehicle roof rating (use the lower of the two).

3. Preparation: Ensure rails are clean and free from dirt/debris.

Step-by-Step Fitting

1. Unpack & inspect

   • Remove both roof bars and all fittings from packaging.

   • Check that you have all components and that nothing is damaged.

2. Orient the bars

   • Each bar is 1200 mm long with an aerodynamic, anti-whistle rubber profile to reduce wind noise and drag.

   • Position the rubber strip to face outward/upwards.

3. Place on roof rails

   • Set the front bar across the roof rails and slide/locate the feet onto the rails.

   • Repeat with the rear bar, placing it parallel to the front.

4. Adjust spacing

   • Align the bars so they’re centered and evenly spaced. As a guideline, place the front bar slightly ahead and keep a minimum distance in line with general roof bar spacing advice (always refer to vehicle manufacturer recommendations).

5. Secure clamps

   • Wrap the clamp-style feet around each rail and tighten evenly on both sides.

   • Ensure the bars sit flush and straight across both rails.

6. Lock (if fitted)

   • Engage any anti-theft locking mechanisms that come with the bars to help prevent theft.

7. Final checks

   • Shake each bar gently — they should not move.

   • Recheck tightness after a short drive.

   • Remove the bars before using drive-through car washes to avoid damage.

   • Quick Fit Notes 

     • Type: Duo Rail Roof Bars for vehicles with raised or flush rails

     • Max load: 75 kg (bars + cargo)

     • Length: 1200 mm per bar

     • Features: Aerodynamic design, anti-whistle profile, T-slot for accessories, quick fixing system & anti-theft locks