Truma Solenoid Valve 30 mbar 70000-38200 | Ultrastore Gas Valve

Truma Solenoid Valve 30 mbar

The Truma Solenoid Valve 30 mbar (Part No. 70000-38200) is a genuine Truma gas control component used in Truma Ultrastore water heaters installed in caravans, campervans and motorhomes. The solenoid valve regulates the flow of LPG gas to the burner assembly, allowing the heater to operate safely and efficiently.

When the heater receives a signal from the control system, the valve opens to allow gas to reach the burner. When the system is switched off or a safety condition occurs, the valve automatically closes to stop the gas flow. This ensures the water heater operates with the correct 30 mbar gas pressure, which is the standard operating pressure for most caravan LPG appliances.

This replacement valve is commonly used in Truma Ultrastore Rapid and Ultrastore Series water heaters, making it an essential service part when repairing or refurbishing older Truma boiler systems.

Why Choose This Spare Part

• Original Truma replacement part – Part No. 70000-38200.

• Controls LPG gas flow to the heater burner.

• Designed for 30 mbar caravan gas systems.

• Used in Truma Ultrastore and Rapid water heaters.

• Ensures safe operation and automatic gas shut-off.

A correctly functioning solenoid valve is critical for safe gas appliance operation and reliable ignition of the heater burner.

Key Features

• Gas solenoid control valve for Truma water heaters

• Designed for 30 mbar LPG systems

• Controls gas flow to the burner assembly

• Compatible with Truma Ultrastore heater models

• Genuine Truma part number 70000-38200

Technical Specifications

Where and How to Fit This Product

The Truma Solenoid Valve (70000-38200) is installed inside the Truma water heater assembly, positioned in the gas supply line feeding the burner.

Installation Overview

1. Turn off the LPG gas supply and disconnect the vehicle power supply.

2. Remove the outer heater casing to access the internal burner and gas components.

3. Locate the existing solenoid valve on the gas feed line leading to the burner.

4. Disconnect the electrical connectors and gas pipe connections.

5. Install the new Truma solenoid valve (70000-38200) in the same orientation.

6. Reconnect the gas pipe and electrical wiring securely.

7. Reassemble the heater casing and perform a gas leak and function test before use.

Because this component is part of the LPG gas system, installation should always be carried out by a qualified gas technician or caravan service engineer.

What’s Included

• 1 × Truma Solenoid Valve 30 mbar – Part No. 70000-38200

(Electrical coil, heater assembly and additional gas fittings may be supplied separately depending on configuration.)

Why Buy This Spare Part?

If the gas valve in your Truma water heater becomes faulty or worn, replacing it with the Truma Solenoid Valve 30 mbar (70000-38200) restores safe gas control and reliable burner operation. Using a genuine Truma replacement part ensures correct compatibility with Ultrastore heater systems and helps maintain the safe operation of your caravan or motorhome hot water system.