Trumatic Piezo Ignitor S3002 Old 30030-00300 | Caravan Heater Spare

Trumatic Piezo Ignitor S3002 Old

The Trumatic Piezo Ignitor S3002 Old is a genuine-style replacement ignition component for Truma S 3002 caravan and motorhome heaters using the old front case design. The product listing identifies it as part number 30030-00300 and states compatibility from April 1993 onwards. A Truma S 3002 parts list also identifies 30030-00300 as the piezo ignitor for appliances with front case, old design, for heaters manufactured after 05/1993.

Why Choose This Part?

• Designed for Trumatic S 3002 heaters with the old-style front case

• Correct SKU / part number: 30030-00300

• Suitable for post-May 1993 / April 1993 onwards applications

• Ideal for restoring reliable manual ignition on older Truma heater setups

• Useful replacement when the existing ignitor has become weak, inconsistent, or failed completely

Product Information

Weight

The Caravan-Life product page does not publish a product weight. Two reseller listings for the same part number show the item at 50g and 51g, so the best evidence-based figure is approximately 50–51 grams. Since that weight is not confirmed by Truma or Caravan-Life, it is best presented as an approximate shipping/product weight rather than a guaranteed manufacturer specification.

Where It Fits

This part fits:

• Trumatic S 3002 heaters

• Old front case design

• Heaters manufactured after May 1993

• Parts-list reference 42 on the Truma S 3002 schematic

The Truma S 3002 parts list distinguishes this ignitor from the new-design front case version, which uses a different ignitor part number (30040-62900), so matching the front case style is important before ordering.

Fitting Instructions

Important: This is a gas appliance spare. Fitting should only be carried out by a competent caravan/motorhome gas engineer or a suitably qualified technician.

Basic fitting guide

1. Isolate the heater from gas supply and make sure the appliance is fully cool.

2. Remove the heater front cover / front case to access the ignition components.

3. Locate the existing piezo ignitor on the heater assembly.

4. Carefully disconnect the ignitor lead / connection from the old unit.

5. Remove the faulty ignitor and fit the new 30030-00300 ignitor in the same position.

6. Reconnect the ignition lead securely and check routing so it does not foul other components.

7. Refit the front case and test the ignition operation.

8. Confirm the heater lights correctly and operates safely.

Before ordering / fitting

• Check your heater is a Trumatic S 3002

• Confirm it has the old-style front case

• Confirm the heater is from after 05/1993

• Cross-check part number 30030-00300 against your existing component or schematic reference

Product Compatibility

What’s Included

• 1 x Trumatic Piezo Ignitor S3002 Old

• Part number: 30030-00300

No additional fittings or accessories are clearly listed on the product page, so it is safest to assume the sale is for the ignitor unit only unless the seller confirms otherwise.

Why Buy This Part?

• Straight replacement for the correct older Trumatic S 3002 heater setup

• Helps restore dependable ignition performance

• Easy part-number matching with 30030-00300

• Suitable for caravan and motorhome heater repairs

• Clear compatibility for old front case applications after 05/1993